Bidders read the CIM before they have seen a single contract. Whatever price they put in their first-round letter is anchored on it. That makes it the most influential document in a sale process and, if it is written carelessly, the most expensive one to walk back.
What is a confidential information memorandum?
A confidential information memorandum is a marketing document, prepared by the seller and its adviser, that describes a business for sale in enough depth for a buyer to submit an indicative, non-binding offer. It is shared only with parties who have signed a non-disclosure agreement, which is where the “confidential” in the name comes from.
You will also hear it called an information memorandum, an offering memorandum or simply “the book”. In private equity circles “CIM” is the default.
It is not a legal disclosure document. Most CIMs open with a disclaimer stating that the seller makes no representation as to accuracy and that only the warranties in the final purchase agreement count. That disclaimer protects the seller, but it does not stop a bidder from cutting its price, or walking away, when the data room contradicts the memorandum.
How is a CIM different from a teaser and the data room?
Three documents, three stages. People mix them up, and the mix-up causes real problems: teasers that leak the company name, CIMs stuffed with raw exports, data rooms opened before anyone has read the story.
| Teaser | CIM | Data room | |
|---|---|---|---|
| When it goes out | First approach, before the NDA | After the NDA is signed | After indicative offers, for shortlisted bidders (a small first-round pack may open earlier) |
| Length | 1 to 3 pages | 30 to 80 pages | Hundreds to thousands of files |
| Names the company | Usually not | Yes | Yes |
| Purpose | Generate interest | Support an indicative valuation | Let bidders verify and price a binding offer |
| Who writes it | Adviser | Adviser with management | Seller’s team, organised by the adviser |
| Tone | Headline | Narrative with evidence | Source documents, no narrative |
| Format | PDF, often emailed blind | PDF, ideally shared via the room | Indexed folders with permissions |
The handover points matter for room planning. If your adviser intends to release the CIM through the data room, the room must be built, indexed and permissioned for first-round bidders before the CIM date, not after it. Our guide on when to open a data room works through that timing.
What sections does a CIM contain?
The order varies by adviser, but the content is remarkably consistent across mid-market deals. A typical memorandum covers ten areas.
1. Executive summary and investment highlights. Five to eight reasons to buy, each one a claim that later sections must support. “Ninety-four per cent gross revenue retention” is a highlight. “Market leader” without a source is a liability.
2. Company overview and history. Founding, ownership, legal structure, locations, milestones. Short, factual, and consistent with the corporate records bidders will see later.
3. Products and services. What is sold, to whom, at what price points, and how it is delivered. For technology businesses this is where the product architecture and IP position appear.
4. Market and competition. Size, growth, segments, competitive landscape and the company’s position. Cite third-party studies where you can, and put copies of them in the room.
5. Customers and go-to-market. Customer concentration, retention, contract structure, sales channels and pipeline. Usually anonymised at this stage (“Customer A, a US healthcare group”).
6. Operations and people. Facilities, suppliers, systems, headcount by function, key processes.
7. Management team. Biographies of the people a buyer will be backing, and a view on who stays after the sale.
8. Historical financials. Three years of income statements and balance sheets, often with the current year to date, revenue bridges and an adjusted EBITDA reconciliation.
9. Projections. The management case for the next three to five years, with the key assumptions spelled out.
10. Transaction overview. What is for sale, the timetable, and how to submit an indicative offer. Often this sits in a separate process letter instead; our guide to the M&A process letter covers that document.
How long should a CIM be, and where do the pages go?
Long enough to support a valuation, short enough that a partner at a buyout fund reads it on a flight. For a business with $10 million to $100 million of revenue, 40 to 60 pages is normal. Below that, 25 to 35 pages is often enough; complex multi-division groups can exceed 80.
Here is an illustrative budget for a 50-page memorandum, with the data room folder that has to back each section.
| Section | Pages | Backed by data room folder | What bidders will check later |
|---|---|---|---|
| Executive summary and investment highlights | 5 | Overview | That each highlight is proven somewhere else |
| Company overview and history | 4 | Corporate | Structure chart against registers and filings |
| Products and services | 6 | Commercial, IP | Price lists, product documentation, IP registrations |
| Market and competition | 6 | Overview (market studies) | The underlying third-party reports |
| Customers and go-to-market | 6 | Commercial (anonymised) | Revenue by customer, churn, contract terms |
| Operations and people | 5 | People, Operations | Headcount census, supplier contracts, leases |
| Management team | 3 | People | Service agreements, incentive plans |
| Historical financials | 8 | Financials | Audited accounts, monthly management accounts |
| Projections | 5 | Financials (model) | The model and its assumptions |
| Transaction and process | 2 | Process letter, not the room | Nothing; it sets the rules |
Where the pages go in a 50-page CIM, and which folder backs each section
Count the pages that carry hard numbers: customers, operations, historical financials and projections. That is 24 pages out of 50, almost half the book. Every one of those numbers will be reconciled by a bidder’s financial adviser once the full room opens.
Why must every CIM number reconcile to the data room?
Because the second round is, in effect, an audit of the first.
A buyer submits an indicative offer of, say, eight times adjusted EBITDA, based on the CIM. In the second round its accountants rebuild that EBITDA from the monthly management accounts and the general ledger. If the adjustments in the memorandum cannot be supported, the multiple stays the same but the EBITDA shrinks, and so does the price. Worse, a bidder who finds one unsupported figure starts treating every figure as suspect.
The practical defence is a single locked dataset.
- Freeze a financial close (for example, the last full month before drafting) and use it for both the CIM and the room.
- Keep a reconciliation file that maps every number in the memorandum to a source document and a folder index number.
- Have someone outside the drafting team tick every figure against that file before the CIM is released.
- If the numbers move after release, issue a dated supplement through the room rather than quietly updating the PDF.
A CIM is judged in the first round and audited in the second. Write it knowing that every adjective will meet a spreadsheet.
The tracing exercise also tells you what the first-round data room pack should contain. If the CIM quotes customer retention, put the anonymised cohort table in the room. Our due diligence checklist lists what typically sits in that first wave.
How should the CIM be distributed to bidders?
Through the data room, as a view-only, watermarked document, for most competitive processes. Email still happens, especially in smaller deals, but it gives up three things you will want later.
A record of who received it. NDAs often require the bidder to return or destroy confidential material if it drops out. You cannot enforce that properly if you do not know which version reached which people.
Engagement data. The room’s activity reports show which bidders read the financial section twice and which never got past the summary. Advisers use that to judge who is serious. Our guide to data room analytics explains how to read those signals without over-reading them.
Control after the fact. If a bidder drops out, you remove its access. With document rights control, even downloaded copies can be revoked on platforms that support it.
Watermarks should carry the viewer’s name or email and a timestamp. If a CIM turns up in the hands of a competitor or a journalist, the watermark is how you find out which bidder let it go.
The confidentiality wording on the cover page and the disclaimer inside both matter, and counsel should draft them. They work after a leak. Permissions, watermarks and access logs work before one.
Who writes the CIM, and how long does it take?
The sell-side adviser drafts; management supplies facts and reviews. Expect four to eight weeks from kick-off to a release-ready version for a mid-market business, longer if the financials need restating or a quality of earnings review is running in parallel.
A common split of work:
| Task | Lead | Typical effort |
|---|---|---|
| Story, positioning, investment highlights | Adviser with CEO | Several workshops |
| Market section | Adviser, sometimes a market study firm | 1 to 3 weeks |
| Financial section and adjustments | CFO with adviser, ideally after a sell-side QoE | 2 to 4 weeks |
| Customer and operations data | Finance and operations leads | 1 to 2 weeks |
| Fact check and reconciliation | Someone not involved in drafting | 3 to 5 days |
| Legal review of disclaimers and confidentiality wording | Seller’s counsel | A few days |
If a sell-side quality of earnings report is commissioned, schedule it so the adjusted EBITDA in the memorandum matches the report. Our guide to quality of earnings covers what the QoE team needs from the room.
What should never go in a CIM?
Some information is too sensitive for a document that may reach a dozen parties, several of them competitors.
- Customer names with contract values, unless the buyer pool is tiny and none of them compete with you.
- Named employee salaries or personal data beyond senior management biographies.
- Detailed product roadmaps or unpatented technical know-how.
- Pricing by customer, margin by product line at a granular level, or supplier cost terms.
- Pending litigation strategy or privileged legal advice.
- Anything you would not be comfortable seeing in a rival’s planning meeting next quarter.
Those items belong later, in a staged release to shortlisted or preferred bidders, sometimes only to a clean team. The staged disclosure guide shows how to sequence them.
How do you manage versions and supplements?
Drafts multiply fast. Management comments, adviser edits, legal review, a late change to the projections. By release day there may be fifteen versions in circulation internally.
Keep the drafts out of the bidder-facing room entirely. Use an internal folder visible only to the seller’s team and advisers, number each version, and release one final PDF. If something material changes afterwards, such as a big customer loss or a revised forecast, publish a short dated supplement in the same folder and notify every bidder group at once. Treat bidders equally; an update sent to one favoured party and not the others is the kind of thing that sours a process and can come back in later disputes.
Record the release date and version in the data room index. When the purchase agreement is negotiated, buyers sometimes ask for the CIM to be excluded from the information they rely on, or included; either way, the record of what was released, and when, matters.
Which mistakes make bidders distrust a CIM?
The same handful, deal after deal.
Adjusted EBITDA with no bridge. If the memorandum shows adjusted earnings without a line-by-line bridge from reported figures, bidders assume the adjustments are aggressive and discount them.
Highlights that are not proven later. Every investment highlight needs a page, a chart or a table that supports it. A highlight with nothing behind it reads as filler.
Inconsistent definitions. Revenue in the summary is bookings, revenue in the financials is recognised revenue, and the customer count includes trials. Pick definitions, state them once, use them everywhere.
Stale data. A CIM built on numbers that are six months old by the time the first round closes forces a supplement at the worst moment.
A teaser that already identified the company. Not strictly a CIM problem, but common: so much detail in the blind teaser that any industry insider can name the target before signing anything.
Preparing a sale and need a room that can host the CIM, track who read it and stage the rest of the release? Compare the providers we rank for selling a business.
See sell-side picksFrequently asked questions
What does CIM stand for in M&A?
Confidential information memorandum. It is the detailed selling document a sell-side adviser sends to bidders after they sign an NDA, used to support indicative offers.
How long is a typical confidential information memorandum?
Usually 30 to 80 pages. For a mid-market business with $10 million to $100 million of revenue, 40 to 60 pages is common.
Is a CIM legally binding?
No. CIMs carry disclaimers saying the seller makes no warranty as to accuracy, and buyers rely on the warranties in the final purchase agreement. Inaccurate figures still cost the seller through lower prices and lost trust.
Should a CIM be sent by email or through a data room?
A data room is better for competitive processes: the CIM can be view-only and watermarked, you can see who opened it, and you can withdraw access when a bidder drops out.
What is the difference between a CIM and a pitch deck?
A pitch deck is a short presentation used in fundraising or management meetings. A CIM is a much longer written document with financials, market analysis and operational detail, prepared for buyers of a business.
